Dalian's automatic processing results in high production efficiency. Modern machine tool operators can operate multiple equipment at the same time. In addition to the fixed production and processing rhythm, automatic loading and unloading replace manual operation, which can well control the beat and avoid the impact on the production rhythm due to human factors, The production efficiency is greatly improved.

The products produced by automatic line shall have sufficient output; The product design and process shall be advanced, stable and reliable, and remain basically unchanged for a long time. The adoption of automatic line in mass production can improve labor productivity, stabilize and improve product quality, improve working conditions, reduce production floor area, reduce production cost, shorten production cycle, ensure production balance, and have remarkable economic benefits. The CNC machine tool robot can carry out reciprocating operation on the linear layout machine tool assembly line through the guide rail installed on the ground, rationalize the occupation of factory space, and flexibly adapt to the switching of different working procedures of different batches of products.

The robot can operate continuously in harsh environment for 24 hours, fully liberate the factory capacity, shorten the delivery time and improve the market competitiveness. If the "change" is implemented properly, it means that the workload can be reduced rather than increased. Where you can achieve fruitful results through correct changes, you must realize intelligent and automatic tool change in order to achieve your goal of finishing.

Fault analysis analyzes the fault type according to the known fault conditions and the fault classification method described in the previous section, so as to determine the troubleshooting principle. Since most faults are indicated, generally, a variety of possible causes of the fault can be listed according to the NC system diagnosis manual and operation manual of the machine tool. Automatic processing is completely programmed by people. Intelligent processing is that the processing process can automatically identify the working conditions and select different programs or processes or methods or tools. One way is vibration feeding, which is divided into circular vibration and direct vibration. It is a module that generates power by controlling the attraction and release of electromagnet to convert electric energy into mechanical energy.

The motion control of materials mainly has two adjustment parameters: frequency and voltage. The frequency can control the vibration times per second, and the voltage can control the amplitude. In production, the two parameters need to be adjusted to obtain a stable and uniform feeding action.